
Canadian-made, pre-engineered commercial and industrial steel buildings serving Barrie and area, about 30 minutes from our Orillia headquarters.
Barrie and the Highway 400 corridor are among the fastest-growing areas in Ontario, with new industrial parks, commercial development and logistics businesses moving north from the GTA.
Meta Steel Buildings is just up the highway in Orillia and builds pre-engineered steel buildings throughout Barrie and Simcoe County: warehouses, contractor shops, commercial buildings and truck facilities. We're members of the Barrie Construction Association.
What we build in Barrie

Local know-how
Being 30 minutes away means we're on site often, from the first walk-through to final inspection. Barrie's snow loads are higher than the GTA's, and every building we supply is engineered for its exact location under the Ontario Building Code.
One accountable team
Meta Steel Buildings handles consulting, 3D design, Canadian steel fabrication, foundations, permits and erection under one contract. We're registered with Professional Engineers Ontario, WSIB and Avetta. You can start right now in our online 3D building designer.
Most Barrie-area projects follow the same path: confirm zoning, size the building around your operation, get engineered drawings and a building permit, then pour the foundation while the steel is fabricated. These guides cover each step:
Every Meta Steel building is engineered for the climatic loads the Ontario Building Code sets for its exact location (2024 OBC, Supplementary Standard SB-1). For Barrie, the code values are:
| Ground snow load, Ss (1-in-50) | 2.5 kPa (about 52 psf) |
|---|---|
| Associated rain load, Sr | 0.4 kPa |
| Hourly wind pressure (1-in-50) | 0.36 kPa |
| January design temperature (2.5%) | -24 °C |
| Heating degree-days (below 18 °C) | 4,380 |
That is well above the 0.9 kPa used at Toronto City Hall, so roof purlins, frames and snow-drift areas carry noticeably more steel than a GTA building of the same size. The ground snow load is only the starting point: the engineer converts it to a roof load using the roof slope, exposure and drifting beside parapets, higher roofs or neighbouring buildings, so two buildings in the same town can need different framing. The cold-weather numbers drive insulation and heating design. Learn more about Ontario snow loads and insulating a steel building.
Yes. We are headquartered in nearby Orillia and are a member of the Barrie Construction Association.
Yes. We prepare stamped drawings and coordinate the permit and site plan process with the City of Barrie and surrounding townships.
The 2024 Ontario Building Code (SB-1) sets a 1-in-50 ground snow load of 2.5 kPa (about 52 psf) plus a 0.4 kPa rain load for Barrie. The engineer converts that to a roof snow load for your building's slope, exposure and drift areas, and designs the frames and purlins to carry it.
Call (888) 230-3363 or request a free quote online with your building size, use and site location. You can also design your building in our online 3D designer first.
Innisfil · Springwater · Oro-Medonte · Essa · Bradford · Orillia
Also serving: Toronto · Mississauga · Brampton · Vaughan · Hamilton · Oshawa & Durham Region · Guelph · Orillia · all service areas
Get a free, no-obligation quote engineered for your site. Mon–Fri, 9:00–5:00.