
Canadian-made, pre-engineered commercial and industrial steel buildings serving Oshawa & Durham Region and area, about 1 hour 45 minutes from Orillia.
Oshawa and Durham Region combine automotive and advanced manufacturing, logistics along Highways 401, 407, 412 and 418, and productive farmland to the north. That mix means demand for everything from industrial plants and warehouses to large agricultural buildings.
Meta Steel Buildings designs and builds Canadian-made steel buildings across Durham: Oshawa, Whitby, Ajax, Pickering, Clarington and the rural townships, with one team handling design, permits, foundations and erection.
What we build in Oshawa & Durham Region

Local know-how
Durham's urban municipalities and rural townships have different zoning and permit processes. We work with each municipality's building department and design every building to the Ontario Building Code loads for its exact location.
One accountable team
Meta Steel Buildings handles consulting, 3D design, Canadian steel fabrication, foundations, permits and erection under one contract. We're registered with Professional Engineers Ontario, WSIB and Avetta. You can start right now in our online 3D building designer.
Most Oshawa & Durham Region-area projects follow the same path: confirm zoning, size the building around your operation, get engineered drawings and a building permit, then pour the foundation while the steel is fabricated. These guides cover each step:
Every Meta Steel building is engineered for the climatic loads the Ontario Building Code sets for its exact location (2024 OBC, Supplementary Standard SB-1). For Oshawa, the code values are:
| Ground snow load, Ss (1-in-50) | 1.4 kPa (about 29 psf) |
|---|---|
| Associated rain load, Sr | 0.4 kPa |
| Hourly wind pressure (1-in-50) | 0.48 kPa |
| January design temperature (2.5%) | -19 °C |
| Heating degree-days (below 18 °C) | 3,860 |
That is moderate for Ontario: higher than the 0.9 kPa at Toronto City Hall, but well below the 2.4–2.5 kPa used in Ottawa, Barrie and Sudbury. The ground snow load is only the starting point: the engineer converts it to a roof load using the roof slope, exposure and drifting beside parapets, higher roofs or neighbouring buildings, so two buildings in the same town can need different framing. The cold-weather numbers drive insulation and heating design. Learn more about Ontario snow loads and insulating a steel building.
Yes, including Oshawa, Whitby, Ajax, Pickering, Clarington and the northern townships.
Yes. We build commercial, industrial and agricultural steel buildings, each designed to the right code requirements for its use.
The 2024 Ontario Building Code (SB-1) sets a 1-in-50 ground snow load of 1.4 kPa (about 29 psf) plus a 0.4 kPa rain load for Oshawa. The engineer converts that to a roof snow load for your building's slope, exposure and drift areas, and designs the frames and purlins to carry it.
Call (888) 230-3363 or request a free quote online with your building size, use and site location. You can also design your building in our online 3D designer first.
Whitby · Ajax · Pickering · Bowmanville · Port Perry · Uxbridge
Also serving: Toronto · Mississauga · Brampton · Vaughan · Hamilton · Guelph · Orillia · Barrie · all service areas
Get a free, no-obligation quote engineered for your site. Mon–Fri, 9:00–5:00.